Evido EAD-B1000 Manual de usuario descargar pdf (Pagina 84)

TelVue HyperCaster

User Manual / v4.3 / July 2014

HyperCaster

is a registered trademark of TelVue Corporation 800-885-8886 / www.telvue.com

• Enable multicast? – If multicasting has been enabled for this network connection, this entry

will display yes.

To edit a network configuration, click on the Edit icon in the Action column. The Edit Network

Configuration screen is displayed.

The following fields are editable.

• Name – the name of the host interface, such as eth0 or eth1.

• IP Address – Select either DHCP or Static. If Static, enter the assigned the IP address.

TelVue

generally recommends a Static IP address so any possible port forwarding does not

become stale due to IP address changes. If DHCP is used, the assignment should match the

MAC address of the Digital Broadcaster. The default is Static IP address 1.1.1.1.

• Netmask– Enter the Netmask value for your network. The default value is 255.255.255.0.

• Default Gateway– Enter the Default Gateway IP address. The Default Gateway is generally

the device on your network that routes Internet traffic to the Digital Broadcaster, for example

a cable or DSL router.

When you have edited the network configuration, click the Save button at the bottom of the screen. A

message verifying that the changes were updated appears at the top of the screen. Click the Config

tab to return to the Configuration menu or click any tab to do other work.

Note: Some changes to the network configuration, such as IP addresses and destination

ports, will make it necessary to reboot the media server. The media server will warn you and

give you the option of canceling the changes.

Changing the Hostname

The hostname of the server is displayed at the top of every screen. The default is the product model.

You can change the hostname of your server to help distinguish it from other servers of the same

model. Click on Change Hostname. Enter the new hostname and click the Save button. When you

reboot the server, the new hostname will be displayed at the top of the screen.

Running netstat

During troubleshooting you might be asked to run the netstat utility. Click the button at the bottom of

the Network Configuration Management screen. The results of the status check will be displayed on

the UI screen.

Set Samba Workgroup

Your server ships with an integrated Samba file sharing server for easy networked access to your

digital video files. Samba is a standard way to transfer files among the server and other computers on

1 2 ... 79 80 81 82 83 84 85 86 87 88 89 ... 102 103

Sin comentarios

Evido EAD-B1000 Manual de usuario Pagina 84