Evido EAD-B1000 Manual de usuario Pagina 78

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 103
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 77
TelVue HyperCaster
®
User Manual / v4.3 / July 2014
© 2014 TelVue Corporation 16000 Horizon Way, Suite 500, Mt. Laurel, NJ 08054
HyperCaster
®
is a registered trademark of TelVue Corporation 800-885-8886 / www.telvue.com
77
3. To edit the decoder configuration, click on the Action icon and fill out these fields. (Note: if this is
an internal ProVue, some of these fields like IP address, port, unicast/multicast cannot be edited.)
For internal ProVue decoders, selecting a Channel will automatically set that decoder to play that
HyperCaster channel. You can have more than one ProVue decoder set to the same channel, for
example for Simulcast applications where one decoder is set to HD, and one to SD.
For external ProVue decoders, selecting a Channel will cause the application to validate that channel’s
output settings match the input settings in the ProVue. If they don’t match, an alert will be displayed
and it is up to the user to address the incompatibility.
The HyperCaster will monitor any internal and external ProVue decoders managed in the application as
part of the System Health check. If communication is lost with the decoder, or the decoder reports
that it is not decoding when associated with a Channel that should be playing, a System Health alert
will be raised.
Remote Server Configuration
Remote Server Configuration requires admin-level privileges. To view or edit information on remote
servers, such as an archive server, click on Configure remote servers. The application displays the
Remote Server Setup screen.
Vista de pagina 77
1 2 ... 73 74 75 76 77 78 79 80 81 82 83 ... 102 103

Comentarios a estos manuales

Sin comentarios