Evido EAD-B1000 Manual de usuario Pagina 4
- Pagina / 103
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
TelVue HyperCaster
®
User Manual / v4.3 / July 2014
© 2014 TelVue Corporation 16000 Horizon Way, Suite 500, Mt. Laurel, NJ 08054
HyperCaster
®
is a registered trademark of TelVue Corporation 800-885-8886 / www.telvue.com
3
Safety Requirements
The following safety instructions apply to TelVue’s server products.
1. Read and follow all warning notices and instructions marked on the product or included in this manual.
Opening or removing covers and/or components may expose you to dangerous high voltage points or
other risks. Qualified personnel should perform all servicing.
2. The maximum ambient temperature for the server is 90 degrees Fahrenheit. Care should be given to
allow sufficient air circulation or space between units when the server is installed in a closed or multi-
unit rack assembly.
3. Installation of the server in a rack without sufficient airflow can be unsafe.
4. If the server is installed in a rack, the rack should safely support the combined weight of all equipment
it supports.
5. The server’s internal AC power supply input is intended for use with the three-wire grounding type
plug (a plug that has a grounding pin). This is a safety feature. Do not defeat the purpose of
grounding type plugs by modifying the plug or using an adapter.
6. Do not allow anything to rest on the power cord. Do not locate the product where persons can walk on
or come in contact with the power cord.
7. Determine that the cumulative power requirements of the server plus other equipment in the rack do
not overload the supply circuits and/or wiring.
8. If using a power strip or similar supply, make sure the power requirement of the chassis, plus the
cumulative power draw of any other equipment in the rack, do not overload the supply circuit.
9. There is danger of explosion if the motherboard battery is incorrectly replaced. A lithium battery on
the server motherboard provides backup power for its internal clock. The battery has an estimated
life expectancy of ten years.
Network and Security
The HyperCaster is a networked digital-video appliance with Ethernet connections and a number of
integrated IP-based services. Prior to powering on your server please read the Getting Started
document that contains information such as power requirements and instructions on how to set your
IP address.
TelVue HyperCaster Getting Started [PDF]
Core Networking Requirements
• IP Address – A static or Dynamic (DHCP) IP will work, but a Static IP is highly recommended.
• Subnet Mask
• Gateway Address – The IP address of your router.
• DNS Address – At least one Domain Name Server (DNS) address.
• NTP Address – Public or private Network Time Protocol (NTP) server address.
Optional Networking Configurations
• Port Forwarding
If your HyperCaster will only be available on your Local-Area Network (LAN), then no ports need to be
opened on your hardware firewall (router). If your HyperCaster will be accessible from outside your
firewall, then certain ports will need to opened on your router. Exactly how to do that is different for
every router and is beyond the scope of this document, but looking up “Port Forwarding” online, for
your router brand and model, will help.
- HyperCaster® 1
- Safety Requirements 4
- Network and Security 4
- Map the Samba Network Drive 5
- Configure the User Interface 5
- CableLabs and ATSC 7
- Organize and Add Content 8
- Use FTP to Add Content 9
- The Dashboard 14
- Server Health 15
- Field Descriptions 16
- Content Management 19
- Import Content 20
- Show Content Page 22
- Content File Actions 24
- Searching and Browsing 28
- Thumbnails and Table Views 29
- Thumbnail View 30
- Table View 30
- Bulk Actions 31
- Add Program – Using TBD 32
- Playlists 34
- Playlist Actions 35
- My Playlists: Append Content 36
- All Playlists: View Metadata 36
- Content RSS Feed 37
- Programming 39
- Display Options 40
- Search Filters 40
- Event Functions 41
- Channel & Content 43
- Date & Time 44
- Optional Recurrence 44
- Optional Program Guide Data 45
- Channel & Overlay 46
- Feed & Capture 47
- Auto Delete 47
- Native CSV Formatting 53
- Event Actions 54
- Event Actions: Modify 55
- Calendar View 56
- Calendar 57
- Content Search 57
- Search Results 58
- External Sources 58
- Programming Guide Page 59
- Reports Tab 60
- As Run Report Field Headings 61
- Config Tab 62
- Channel Setup 63
- Continuity 65
- Content 68
- Customize Metadata Fields 68
- Import Settings 69
- External Devices 70
- Feed Setup 71
- Overlay “Tickers” and “Bugs” 73
- Simulcast Overlays 75
- ProVue Integration 77
- Remote Server Configuration 78
- Add Remote Server 79
- Edit Remote Server 79
- Schedule Configuration 80
- Security Configuration 81
- Server Management 82
- Changing the Hostname 84
- Running netstat 84
- Set Samba Workgroup 84
- Shutdown 85
- Restart Application 85
- Manage Time Settings 86
- View RAID Status 86
- SNMP Support 87
- Switch Configuration 88
- Configure RS232 Settings 89
- Change Switch Configuration 89
- Lock the Switch 90
- User Management 91
- Edit User 92
- Delete User 92
- Add User 92
- Version and Configuration 93
- Download Log Files 94
- Backups 95
- Typical Use Cases 95
- Live Streams 96
- Appendix: Guide to CCMS Plus 99
- Schedule and Media Imports 100
- Directory Folder Structures 101
- Verification File Export 102
- Tasks Tab 102
- Technical Support 103
Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad Evido EAD-B1000
Los Sistemas De Control De Acceso De Seguridad Evido EAD-B2000 El manual del propietario
(23 paginas)
(23 paginas)
Los Sistemas De Control De Acceso De Seguridad Evido EAD-V1000 Instrucciones de operaciones
(9 paginas)
(9 paginas)
© 2020, manymanuals.es. Todos los derechos reservados | 0.183 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales