3. Fill in the fields on the screen as described below.
Port Settings
• A/V Output Port – Select a switch output port from the drop-down list.
• A/V Input Port – Select a switch input port from the drop-down list. If your switch
supports disabling an output select none to turn off the output. If breakaway is enabled,
separate drop-down lists for video input port and audio input port are displayed as shown
in the illustration.
• Duration – optional. However, a duration is recommended so the switch will return home
when the event ends. Enter the time you want the switch event to last in HH:MM:SS
format. Entering a duration also enables conflict checking on the specified output port for
the duration of the event. If you enter 00:00:00 the output will remain switched away
until you change it. If you previously ran a switch event with 0 duration that switched
away from the home port, you can schedule a 0 duration switch event to the home port to
resume normal operation.
Date & Time
• Start – Use a Calendar icon to select a date up to one year from now for the switch event.
• Time – Enter a start time in HH:MM format using 24-hour time. For example, 1:00 PM is
13:00:00.
• Switch Immediately – To start the switch event as soon as the Save button is clicked,
check this box.
Optional Recurrence
If you want to schedule this switch event for the same time on certain days of the week, complete
this section.
• Days of the Week – Check one or more boxes to the right of the day of the week to
make the switch on that day. To switch every day, click Daily, which will check all the
boxes. To uncheck all the boxes, click on None. There is a one-year limit on scheduling
recurring events.
• Until Date – Use a Calendar icon to select the last day for the switch event to recur, up to
one year from today. The last switch will occur on the last day of the week up to and
including the date you select.
Optional Program Guide Data
Enter metadata for switch events that correspond to on-air programs to be included in the
Program Guide.
• Include in Program Guide – checked by default. If you do not want the automatically
generated program guide to display this event, uncheck this box.
Comentarios a estos manuales