Evido EAD-B1000 Manual de usuario descargar pdf (Pagina 83)

TelVue HyperCaster

User Manual / v4.3 / July 2014

HyperCaster

is a registered trademark of TelVue Corporation 800-885-8886 / www.telvue.com

To manage your network configurations, click on the network option. The application displays

the Network Configuration Management screen.

• Interface – the name of the host interface, such as eth0 or eth1.

• Type – the type of network connection, such as Ethernet.

• HW Address – Ethernet card identity

• Link Detected – if the link is being detected.

• IP Address – The IP address of the network. If the IP address is dynamic, this entry will

display DHCP. If DHCP is used, the assignment should match the MAC address of the Digital

Broadcaster.

• Speed – the connection speed.

• Route All Multicast On This Interface – if multicast is being streamed through that

ethernet port. To enable multicasting for this network connection, click on Route All

Multicast below the appropriate ethernet port. Multicast IP addresses must use the range

224.0.0.0 – 239.235.235.235.

Warning: Before enabling multicasting, talk to your system administrator.

• Interface is Active – if the ethernet port is being used.

• Using DHCP – if it is a DHCP or static IP Address.

• Netmask– The Netmask value of the network. The default value is 255.255.255.0.

• Activate at boot? – If this network connection should be activated when the server is booted

this entry will display yes.

1 2 ... 78 79 80 81 82 83 84 85 86 87 88 ... 102 103

Sin comentarios

Evido EAD-B1000 Manual de usuario Pagina 83