
CT-CCV6X Intel Atom D2000/N2000 COM Express Type 6 Module
28
4.10 Ethernet
The Intel® 82583V, a fully-integrated Gigabit Ethernet Media Access Control
(MAC) provides 10/100/1000Mb/s Ethernet interface. The Intel® 82583V is
connected to Port 2 of the PCIe x1 in the PCH. Gigabit transformer has to be
designed on the Carrier Board.
The integrated GbE controller contains power management registers for PCIE,
so it supports the Advanced Configuration and Power Interface (ACPI)
specification. This enables the network-related activity (using an internal host
wake signal) to wake up the host.
GBE0_MDI[0:3]+
GBE0_MDI[0:3]-
Gigabit Ethernet Controller 0: Media Dependent
Interface Differential Pairs 0, 1, 2, 3. The MDI
can operate in 1000, 100 and 10 Mbit/sec
modes. Some pairs are unused in some modes,
per the following:
1000BASE-T 100BASE-TX 10BASE-T
MDI[0]+/- B1_DA+/- TX+/- TX+/-
MDI[1]+/- B1_DB+/- RX+/- RX+/-
MDI[2]+/- B1_DC+/-
MDI[3]+/- B1_DD+/-
Gigabit Ethernet Controller 0 activity indicator,
active low
Gigabit Ethernet Controller 0 link indicator, active
low
Gigabit Ethernet Controller 0 100 Mbit/sec link
indicator, active low
Gigabit Ethernet Controller 0 1000 Mbit/sec link
indicator, active low
Reference voltage for Carrier Board Ethernet
channel 0 magnetics center tap. The reference
voltage is 3.3V.
4.11 LPC
The LPC interface provides legacy I/O support on a Carrier Board via a Super
I/O and system management devices.
LPC multiplexed address, command and data
LPC frame indicates the start of an LPC cycle
LPC serial DMA request input
Comentarios a estos manuales