Evido EAD-D2000 Manual descargar pdf (Pagina 54)

If you want to use the authentication process for getting the RTSP streaming from the product,

you can choose one of the options.

Authentication type

Basic : It uses simple way of encryption of ID and PW with clear text

Digest : It uses more enhanced way of encryption.

Please refer to the http://www.faqs.org/rfcs/rfc2617.html for more information about the

authentication of clients using basic and digest.

Privilege

You can use one of the user groups for RTSP Authentication.

Note

If you have decided the communication way between multicast and unicast, the

option is applied to both of first stream and second stream on the web page. But,

each of the 1

stream and 2

stream can be configured with different way by HTTP

API.

IP Address

In order to get the streaming data from the device, you should set the IP address of group

which is used for PC to join. ‘0,0,0,0’ is configured as a factory default and it enables router

program to generate the available IP for the device automatically. If you want to use any

specific address, type the address in the blank.

Note

UDP/RTP multicast is not allowed for streaming even if the address and the port

information is known.

How auto configuration of IP address works?

As the session name for each RTP session is defined already on the server, your PC can get the

stream by the ‘rtsp:// rtsp server ipaddress : port / rtp session name’ without the manual

decision of IP address on the webpage.

Port

Set the port number used for router to receive the streaming data from the product (No need

for unicast). ‘18888’ is set for video data of 1st stream and ‘28888’ is for video data of 2nd

stream. Refer to the ‘Ports list for the product connection’ at the end of this section 4.5.7.

TTL

Set the TTL value. If you set 1 for TTL, it means the packet will pass only in a subnet (No need

for unicast).

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 95 96

Sin comentarios

Evido EAD-D2000 Manual Pagina 54